Influence of eight debridement techniques on three different titanium surfaces: A laboratory study.

OBJECTIVES: Debridement methods may damage implant surfaces. This in vitro study investigated eight debridement protocols across three implant surfaces to assess both biofilm removal and surface alterations. MATERIAL AND METHODS: One hundred sixty commercially pure titanium discs were treated to simulate commercially available titanium implant surfaces-smooth, abraded and abraded and etched. Following inoculation with whole human saliva to create a mixed species biofilm, the surfaces were treated with eight debridement methods currently used for clinical peri-implantitis (n = 10). This included air abrasion using powders of glycine, sodium bicarbonate and calcium carbonate; conventional mechanical methods-piezoelectric scaler, carbon and stainless steel scalers; and a chemical protocol using 40% citric acid. Following treatment, remaining biofilm was analysed using scanning electron microscopy and crystal violet assays. For statistical analysis, ANOVA was applied (p < 0.05). RESULTS: All debridement techniques resulted in greater than 80% reduction in biofilm compared with baseline, irrespective of the surface type. Glycine powder delivered through an air polishing system eliminated the most biofilm. Mechanical instruments were the least effective at eliminating biofilm across all surfaces and caused the greatest surface alterations. Citric acid was comparable with mechanical debridement instruments in terms of biofilm removal efficacy. Titanium surfaces were least affected by air abrasion protocols and most affected by mechanical methods. CONCLUSIONS: Mechanical protocols for non-surgical debridement should be approached with caution. Glycine powder in an air polisher and 40% citric acid application both gave minimal alterations across all implant surfaces, with glycine the superior method in terms of biofilm removal.

Quantifying the Risks and Benefits of Continuing Labor Induction: Data for Shared Decision-Making.

OBJECTIVE: This study aimed to quantify the relative maternal and fetal risks and benefits of continuing labor induction. STUDY DESIGN: This retrospective cohort study included nulliparous women with nonanomalous, singleton, vertex, term pregnancies undergoing labor induction with intact membranes at a tertiary-care academic hospital from January 2015 to April 2017. The primary outcome was mode of delivery. Secondary outcomes included hemorrhage, transfusion, infection, and composite neonatal morbidity. The data were analyzed using chi-square and Fisher's exact tests. Multivariable regression was used to control for potential confounders. RESULTS: A total of 955 patients met the inclusion criteria. The median induction duration was 32.3 hours (interquartile range: 20.4-41 hours) and the vaginal delivery rate was 70.5% (n = 673). The chance of vaginal delivery at 12, 24, 36, 48, 60, and ≥60 hours was 76, 83, 77, 74, 72, and 48%, respectively. After controlling for confounders, there was a 20% decrease in chance of vaginal delivery with induction ≥ 24 hours compared with induction < 24 hours. The adjusted relative risks of hemorrhage, transfusion, and infection with induction ≥ 24 hours compared with induction < 24 hours were 1.9, 2.2, and 2.7, respectively (95% confidence interval [CI] of 1.4-2.5, 1.1-3.9, and 1.8-4.0, respectively). The relative risk for these outcomes remained stable or decreased at each subsequent time point. The increasing risks of hemorrhage and infection were primarily among patients who underwent cesarean delivery. There was no association between induction duration and neonatal morbidity. CONCLUSION: In this cohort, the chance of vaginal delivery remained nearly 50% even when induction extended beyond 60 hours. Risks of hemorrhage and maternal infection rose modestly over time, but primarily in patients who underwent cesarean delivery. There was no difference in the risk of transfusion beyond 24 hours and no association between induction duration and neonatal morbidity. These findings may be useful when engaging patients in shared decision-making during labor induction.

Metabolomics Analyses of 14 Classical Neurotransmitters by GC-TOF with LC-MS Illustrates Secretion of 9 Cell-Cell Signaling Molecules from Sympathoadrenal Chromaffin Cells in the Presence of Lithium.

The classical small molecule neurotransmitters are essential for cell-cell signaling in the nervous system for regulation of behaviors and physiological functions. Metabolomics approaches are ideal for quantitative analyses of neurotransmitter profiles but have not yet been achieved for the repertoire of 14 classical neurotransmitters. Therefore, this study developed targeted metabolomics analyses by full scan gas chromatography/time-of-flight mass spectrometry (GC-TOF) and hydrophilic interaction chromatography-QTRAP mass spectrometry (HILIC-MS/MS) operated in positive ionization mode for identification and quantitation of 14 neurotransmitters consisting of acetylcholine, adenosine, anandamide, aspartate, dopamine, epinephrine, GABA, glutamate, glycine, histamine, melatonin, norepinephrine, serine, and serotonin. GC-TOF represents a new metabolomics method for neurotransmitter analyses. Sensitive measurements of 11 neurotransmitters were achieved by GC-TOF, and three neurotransmitters were analyzed by LC-MS/MS (acetylcholine, anandamide, and melatonin). The limits of detection (LOD) and limits of quantitation (LOQ) were assessed for linearity for GC-TOF and LC-MS/MS protocols. In neurotransmitter-containing dense core secretory vesicles of adrenal medulla, known as chromaffin granules (CG), metabolomics measured the concentrations of 9 neurotransmitters consisting of the catecholamines dopamine, norepinephrine, and epinephrine, combined with glutamate, serotonin, adenosine, aspartate, glycine, and serine. The CG neurotransmitters were constitutively secreted from sympathoadrenal chromaffin cells in culture. Nicotine- and KCl-stimulated release of the catecholamines and adenosine. Lithium, a drug used for the treatment of bipolar disorder, decreased the constitutive secretion of dopamine and norepinephrine and decreased nicotine-stimulated secretion of epinephrine. Lithium had no effect on other secreted neurotransmitters. Overall, the newly developed GC-TOF with LC-MS/MS metabolomics methods for analyses of 14 neurotransmitters will benefit investigations of neurotransmitter regulation in biological systems and in human disease conditions related to drug treatments.

Effectiveness of implant surface debridement using particle beams at differing air pressures.

Because implant surface decontamination is challenging, air powder abrasive systems have been suggested as an alternative debridement method. This in vitro study investigated the effectiveness of different powder formulations and air pressures in cleaning implant surfaces and the extent of surface damage. A validated ink model of implant biofilm was used. Sterile 4.1 × 10 mm Grade 4 titanium implants were coated in a blue indelible ink to form a uniform, visually detectable biofilm-like layer over the implant threads and mounted into a bone replica material with bony defects to approximate peri-implantitis. Air powder abrasive treatments were undertaken using glycine, sodium bicarbonate, or calcium carbonate powder at air pressures of 25, 35, 45, and 55 psi. Digital macro photographs of the threads were stitched to give composite images of the threads, so the amount of ink remaining could be quantified as the residual area and expressed as a percentage. Implant surfaces were also examined with scanning electron microscopy to grade the surface changes. No treatment cleaned all the surface of the threads. The powders were ranked in order of decreasing effectiveness and decreasing surface change into the same sequence of calcium carbonate followed by sodium bicarbonate followed by glycine. Higher air pressure improved cleaning and increased surface change, with a plateau effect evident. All powders caused some level of surface alteration, with rounding of surface projections most evident. With air powder abrasive systems, there is a trade-off between cleaning efficacy and surface damage. Using this laboratory model, sodium bicarbonate and calcium carbonate powders were the most effective for surface cleaning when used at air pressures as low as 25 psi.

Estimating the residency expansion required to avoid projected primary care physician shortages by 2035.

PURPOSE: The purpose of this study was to calculate the projected primary care physician shortage, determine the amount and composition of residency growth needed, and estimate the impact of retirement age and panel size changes. METHODS: We used the 2010 National Ambulatory Medical Care Survey to calculate utilization of ambulatory primary care services and the US Census Bureau to project demographic changes. To determine the baseline number of primary care physicians and the number retiring at 66 years, we used the 2014 American Medical Association Masterfile. Using specialty board and American Osteopathic Association figures, we estimated the annual production of primary care residents. To calculate shortages, we subtracted the accumulated primary care physician production from the accumulated number of primary care physicians needed for each year from 2015 to 2035. RESULTS: More than 44,000 primary care physicians will be needed by 2035. Current primary care production rates will be unable to meet demand, resulting in a shortage in excess of 33,000 primary care physicians. Given current production, an additional 1,700 primary care residency slots will be necessary by 2035. A 10% reduction in the ratio of population per primary care physician would require more than 3,000 additional slots by 2035, whereas changing the expected retirement age from 66 years to 64 years would require more than 2,400 additional slots. CONCLUSIONS: To eliminate projected shortages in 2035, primary care residency production must increase by 21% compared with current production. Delivery models that shift toward smaller ratios of population to primary care physicians may substantially increase the shortage.

Super-genotype: global monoclonality defies the odds of nature.

The ability to respond to natural selection under novel conditions is critical for the establishment and persistence of introduced alien species and their ability to become invasive. Here we correlated neutral and quantitative genetic diversity of the weed Pennisetum setaceum Forsk. Chiov. (Poaceae) with differing global (North American and African) patterns of invasiveness and compared this diversity to native range populations. Numerous molecular markers indicate complete monoclonality within and among all of these areas (F(ST) = 0.0) and is supported by extreme low quantitative trait variance (Q(ST) = 0.00065-0.00952). The results support the general-purpose-genotype hypothesis that can tolerate all environmental variation. However, a single global genotype and widespread invasiveness under numerous environmental conditions suggests a super-genotype. The super-genotype described here likely evolved high levels of plasticity in response to fluctuating environmental conditions during the Early to Mid Holocene. During the Late Holocene, when environmental conditions were predominantly constant but extremely inclement, strong selection resulted in only a few surviving genotypes.